Use method and precautions of oil filter machine

Oil filter machine is a kind of equipment used to filter and clean lubricating oil, hydraulic oil, transformer oil and other industrial oil, its role is to remove impurities, water, oxidation products and other polluting substances in the oil, so as to extend the service life of the oil and protect the equipment. Oil filter machine is widely used in petrochemical, electric power, metallurgy, aerospace and other fields.

1.The use of oil filter machine:

a. Preparation: Check whether the oil filter machine is intact, and confirm whether the filter mesh, filter element and other filter materials are clean. Check whether the temperature and viscosity of the oil meet the requirements.

b. Connect the pipe: Connect the inlet and outlet pipe of the oil filter machine to the fuel tank or the oil circuit system.

c. Start the equipment: Start the oil filter machine, adjust the operating parameters, such as flow, pressure, etc., to ensure the normal operation of the equipment.

d. Monitoring process: In the process of oil filtration, continuous monitoring of pressure, flow and other parameters to ensure the normal operation of the oil filter.

e. Stop operation: When the oil filter is completed, close the oil filter, remove the pipeline, clean the equipment and make a record.

2.The use of oil filter precautions:

a. Safety first: Operators need to wear appropriate protective equipment and pay attention to safety problems during equipment operation.

b. Pay attention to maintenance: regular maintenance of the oil filter machine to maintain the good condition of the equipment and extend the service life.

c. Strict operation: The operator must follow the operating rules to avoid equipment damage or accidents caused by misoperation.

d. Discharge treatment: The waste filter material produced by the oil filter is treated to meet environmental requirements and avoid environmental pollution.

3.When use the oil filter machine, also need to pay attention to the following points:

a. Oil pretreatment: Before filtering oil, necessary pretreatment should be carried out on the treated oil, such as removing large particle impurities, precipitated water, etc., to ensure the oil filtering effect and extend the service life of the filter material.

b. Monitor the oil temperature: During the operation, always monitor the temperature of the oil to avoid aging of the filter material or deterioration of the oil performance due to high temperature.

c. Replace the filter element regularly: The filter element is a very important part of the oil filter, which needs to be replaced regularly according to the use situation to avoid the decrease of the oil filter effect due to the blockage of the filter element.

d. Record operating parameters: In the operation process, it is necessary to record the operating parameters and oil filtering situation in time, so as to facilitate subsequent analysis and comparison, ensure the normal operation of the equipment and timely detection of problems.