News

When the hydraulic station is in use, it is necessary to check the use of hydraulic oil frequently to ensure that the working environment of the hydraulic station is clean. If it is found that the oil has deteriorated, it should be replaced with new oil immediately. Usually, the oil in the hydraulic station should be filtered and replaced regularly. Generally, it is filtered once every six months.

The principle of wind power generation is to use the wind to drive the blades of the windmill to rotate, and then increase the speed of rotation through the speed increaser to drive the generator to generate electricity. According to the current windmill technology, power generation can be started at a breeze speed (the degree of breeze) of about three meters per second.

Industrial circulating water filtration – used in water supply and drainage pipelines such as cooling towers, rolling mills, continuous casting machines, polishing machines, ion exchangers, sprayers, heat exchangers, etc., which have certain requirements for water quality, it can filter out impurities in the water, and prevent clogging of components.

Before replacing, release the original hydraulic oil, check the return oil filter element, oil suction filter element, pilot filter element, to see whether there is iron scrap copper scrap or other impurities,otherwise, there maybe hydraulic component fault.Repair and eliminate, clean the system.

When installing the filter equipment, pay attention to the liquid flow direction indicated on the shell, and install it correctly in the hydraulic system;

Before filtering the hydraulic oil, all cylinders should be retracted to the end.